Learn more
Estimate television running cost from power draw, daily screen time, and electricity rate.
Use this TV electricity cost calculator to estimate the monthly running cost of a television based on realistic viewing time. The calculator is designed to give a fast answer, but the quality of the answer still depends on accurate inputs and a clear idea of what decision you are trying to support.
- Enter Power Rating, Hours Used per Day, and Electricity Rate using the same units you plan to compare or report.
- Read the main estimated monthly cost first, then use the supporting outputs to understand the trade-offs behind that result.
- Compare your numbers with the worked examples below if you want a quick reasonableness check.
The result turns power draw into an actual money estimate, which makes it easier to compare appliances than looking at watts alone. On this page, the primary output is estimated monthly cost.
Scenario 1: 120 W TV used 5 hours a day at $0.19 per kWh. Inputs used: powerWatts: 120, hoursPerDay: 5, ratePerKwh: 0.19. Example result: $3.42. This TV viewing pattern results in $3.42 per month in electricity cost. Scenario 2: 180 W large TV used 7 hours a day at $0.27 per kWh. Inputs used: powerWatts: 180, hoursPerDay: 7, ratePerKwh: 0.27. Example result: $10.21. For this larger-screen setup, the estimated monthly running cost is $10.21.
Core formula: daily kWh = (watts / 1000) * hours; cost = kWh * rate. The calculator converts appliance wattage into daily energy use, then applies your electricity rate to estimate recurring cost over longer time periods.
- The model assumes the appliance draws the same power whenever it is on.
- Bills can differ if tariffs change by time of day or include fixed charges.
Use this calculator when budgeting household energy use, comparing appliances, or checking whether an always-on device is costing more than expected. Related paths for follow-up analysis include electricity cost calculator, appliance electricity cost calculator, heater electricity cost calculator, and air conditioner electricity cost calculator.
Most bad outputs come from a few repeated input errors or interpretation mistakes. Use this short checklist before relying on the result.
- Using label wattage when real-world power draw changes during operation.
- Ignoring standby use or duty cycles for devices that switch on and off.
- Comparing estimated running cost without checking the actual tariff on the utility bill.
